Parameter Name |
Load HO Bandwidth |
|---|---|
Description |
In HO Algorithm I, the load handover is allowed only when the receive level of the serving cell is within the range of (Edge HO DL RX_LEV Threshold, Edge HO DL RX_LEV Threshold + Load HO Bandwidth). In HO Algorithm II, the load handover is allowed only when the difference between the receive level of the neighbor cell and the receive level of the serving cell is within the range of (Inter-cell HO Hysteresis - Load HO Bandwidth, Inter-cell HO Hysteresis). |
GUI Value Range |
[0,63] |
Default Value |
25 |
Unit |
dB |
Step |
- |
Modification Rules |
None |
Configuration Policy |
The setting of this parameter determines the maximum width of the handover strip during load handover. |
Recommended Value |
25 |
Parameter Relationship |
Only when the receive level of the serving cell is within the range of (Edge HO DL RX_LEV Threshold, Edge HO DL RX_LEV Threshold + Load HO Bandwidth), a load handover is allowed. |
BSC Feature |
Handover |
Parameter Class |
Parameters About Radio Resources |
Caution |
None |