Parameter Name |
Filter Length for SDCCH REP_QUANT |
---|---|
Description |
When the Measurement Report Type is EMR, this parameter specifies the length of the filter for the SDCCH REP_QUANT. By setting this parameter, you can use the REP_QUANT in multiple EMRs, thus avoiding the case that the REP_QUANT in a single EMR is inaccurate. |
GUI Value Range |
[0,31] |
Default Value |
2 |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
This parameter should be set to a small value because the SDCCH seizure duration is shorter than the TCH seizure duration for the MS. |
Recommended Value |
2 |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Radio Resources |
Caution |
None |