Parameter Name |
UL Expected Level at HO Access |
|---|---|
Description |
This parameter specifies the expected uplink receive level on a new channel after an MS is handed over to a new cell. This parameter is used for the MS Power Prediction after HO. This parameter should be consistent with the UL RX_LEV Upper Threshold in Huawei II power control algorithm, thus ensuring a relatively high uplink receive level on the new channel after handover, increasing the transmit power of the MS, and avoiding call drops caused by too low a uplink receive level. The value of this parameter ranges from 0 to 63 (corresponding to -110 dBm to -47 dBm). |
GUI Value Range |
[0,63] |
Default Value |
30 |
Unit |
Levels |
Step |
- |
Modification Rules |
None |
Configuration Policy |
If this parameter is set to a too small value, call drop may easily occur. |
Recommended Value |
30 |
Parameter Relationship |
None |
BSC Feature |
Handover |
Parameter Class |
Parameters About Radio Resources |
Caution |
None |