Parameter Name |
UL Subcell Load Hierarchical HO Period(s) |
|---|---|
Description |
This parameter specifies the hierarchical handover period of the load handover from the UL subcell to the OL subcell. If the channel seizure ratio of the UL subcell is greater than the UL subcell general overload threshold, all the calls in the cell send handover requests at the same time and the load on the BSC increases in a short time. Thus, congestion may occur in the target cell and call drops may be caused. Through the hierarchical load handover algorithm, the calls in the cell are handed over to the OL subcell by level. This parameter specifies the period of load handover for each level. |
GUI Value Range |
[1,255] |
Default Value |
5 |
Unit |
Seconds |
Step |
- |
Modification Rules |
None |
Configuration Policy |
If this parameter is set to a too small value, the system flow load is increased. |
Recommended Value |
5 |
Parameter Relationship |
UL subcell general overload threshold(%) |
BSC Feature |
Handover |
Parameter Class |
Parameters About Radio Resources |
Caution |
None |