Parameter Name |
DtxMeasUsed |
|---|---|
Description |
This parameter is used as a switch to control the value determination method of measurement reports. When this parameter is set to Open, if DTX is used, the SUB values in the MR should be selected. Otherwise, the PULL values in the MR should be selected. |
GUI Value Range |
[Close,Open] |
Default Value |
Open |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
When this parameter is set to 0 and if the measurement report indicates that DTX is not used, the FULLSET values should be selected. When this parameter is set to 0 and if the measurement report indicates that DTX is used, the SUBSET values should be selected. In latter cases, the SUBSET values should be used irrespective of how DTX is indicated in the subsequent measurement reports. When this parameter is set to 1, whether the FULLSET values or the SUBSET values should be selected depends on the DTX indication bit in the measurement report. That is, if the measurement report indicates that DTX is used, the SUBSET values should be selected; otherwise, the FULLSET values should be selected. |
Recommended Value |
Open |
Parameter Relationship |
None |
BSC Feature |
Handover, power control, discontinuous transmission and discontinuous reception |
Parameter Class |
Parameters About Radio Resources |
Caution |
None |