Parameter Name |
HwIII MA FreqHop Gain 4(0.1dB) |
|---|---|
Description |
This parameter specifies the receive quality gain when the number of frequencies participate in FH is 4. When frequencies are configured for frequency hopping in a cell, the receive quality gain will be obtained. Before performing power control, the BSC needs to consider this gain. |
GUI Value Range |
[0,255] |
Default Value |
0 |
Unit |
dB |
Step |
0.1dB |
Modification Rules |
None |
Configuration Policy |
None |
Recommended Value |
40 |
Parameter Relationship |
None |
BSC Feature |
Power Control |
Parameter Class |
Parameters About Radio Resources |
Caution |
When the frequency hopping in a cell is enabled, the calls in the cell can endure lower carrier-to-interference ratio. In Huawei III power control algorithm, different frequency hopping gains are used to suit different number of frequencies and receive qualities. With frequency hopping gains, the power control amplitude is more accurate and the average transmit power is lower. Thus, the intra-network interference is reduced. |