Parameter Name |
HwIII DL RexQual Protect Factor |
|---|---|
Description |
This parameter specifies the signal quality factor for the protective limitation on calculating the downlink power control adjustment step. The calculated step value cannot exceed the step value that is obtained on the basis of the signal strength protection factor and the signal quality protection factor. The value of this parameter can be adjusted on the basis of the actual network environment. It is recommended that the persons that are unfamiliar with the principle of this algorithm not modify the value. |
GUI Value Range |
[0,100] |
Default Value |
55 |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
None |
Recommended Value |
55 |
Parameter Relationship |
None |
BSC Feature |
Power control |
Parameter Class |
Parameters About Radio Resources |
Caution |
None |