Parameter Name |
Enhanced TCH Adjust Allowed |
|---|---|
Description |
This parameter specifies whether the combination of two half-rate TCHs into one full-rate TCH is allowed in a cell. If this parameter is set to No, the forced handover and call delay caused by timeslot arrangement can be avoided, but there may cause some TCHF-only calls to fail because the timeslot arrangement is unavailable. If this parameter is set to Yes, calls may fail when the timeslot arrangement fails and when the MS does not select the TCHF in the concentric cell. |
GUI Value Range |
[No,Yes] |
Default Value |
Yes |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
Huawei recommends that the parameter Enhanced TCH Adjust Allowed be set to No, the forced handover may fail in the concentric cell. In a normal cell, Huawei recommends that this parameter be set to Yes to ensure that the timeslot arrangement can be performed in the cell. |
Recommended Value |
Yes |
Parameter Relationship |
None |
BSC Feature |
Channel Management |
Parameter Class |
Parameters About Radio Resources |
Caution |
None |