Parameter Name |
Factory Mode |
|---|---|
Description |
This parameter specifies whether to enable or disable the factory mode channel assignment algorithm. If this parameter is set to ON, the BSC evenly assigns channels to the TRXs in a cell. Generally, at the initial stage of site deployment, each TRX is evenly assigned channels. You need to check the connection cable between TRX and RF with no need to perform a dialing test on site. After the initial stage or in other scenarios, it is recommended that this parameter be set to OFF. |
GUI Value Range |
[OFF,ON] |
Default Value |
OFF |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
None |
Recommended Value |
OFF |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Radio Resources |
Caution |
None |