Parameter Name |
IBCA Soft Block Switch |
|---|---|
Description |
This parameter specifies whether to turn on the IBCA soft block switch. If this parameter is set to No, the IBCA soft block switch is turned off. That is, channels are allocated to the newly established call even if its interference is lower than the soft block threshold. This parameter should be set to No when the network is severely congested and there is no high requirement on the speech quality. |
GUI Value Range |
[No,Yes] |
Default Value |
No |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
When idle channels are available in the cell and assigned to calls, the assignments fail if the C/R ratio for calls is not the minimum. In this case, the soft block switch should be turned on. Therefore, it is recommended that this parameter be set to Yes. |
Recommended Value |
None |
Parameter Relationship |
None |
BSC Feature |
Channel Management |
Parameter Class |
Parameters About Radio Resources |
Caution |
The parameter IBCA Allowed should be set to Yes before the configuration of this parameter. |