Parameter Name |
T3121(ms) |
|---|---|
Description |
This timer is used to set the time of waiting a handover complete message after a handover request acknowledgment message is sent by the BSC in 2G/3G handover or inter-BSC handover. If the timer expires, The MS reports a Clear REQ message. |
GUI Value Range |
[500,60000] |
Default Value |
10000 |
Unit |
Milliseconds |
Step |
- |
Modification Rules |
None |
Configuration Policy |
If this timer is set to a higher value, this may waste the channel resources and cause the congestion. If this timer is set to a lower value, this may influence the handover success rate. |
Recommended Value |
10000 |
Parameter Relationship |
None |
BSC Feature |
Channel Management |
Parameter Class |
Parameters About Radio Resources |
Caution |
None |