Parameter Name |
T8(ms) |
|---|---|
Description |
This timer is used to set the time of waiting a handover success message after a handover command is sent in an outgoing BSC handover. If the timer expires, the outgoing BSC handover fails. |
GUI Value Range |
[500,60000] |
Default Value |
10000 |
Unit |
Milliseconds |
Step |
- |
Modification Rules |
None |
Configuration Policy |
If this timer is set to a higher value, this may waste the channel resources and cause the congestion. If this timer is set to a lower value, this may influence the handover success rate. |
Recommended Value |
10000 |
Parameter Relationship |
None |
BSC Feature |
Channel Management |
Parameter Class |
Parameters About Radio Resources |
Caution |
None |