Parameter Name |
TREESTABLISH(ms) |
|---|---|
Description |
For the call on the TCH in stable state, the timer is initiated when the ERROR INDICATION, CONNECTION FAILURE INDICATION, and RELEASE INDICATION messages are received, and the call reestablishment allowed is set to Yes for the cell where the call is. Upon receipt of a CLEAR COMMAND message from the MSC, the timer stops. The BSC sends a CLEAR REQUEST message after the timer expires. |
GUI Value Range |
[5000,40000] |
Default Value |
15000 |
Unit |
Milliseconds |
Step |
- |
Modification Rules |
None |
Configuration Policy |
If this timer is set to a higher value, this seizes the radio resources too much, and influences the channel resource utilization. If this timer is set to a lower value, this may influence the call reestablishment success rate. |
Recommended Value |
15000 |
Parameter Relationship |
None |
BSC Feature |
Channel Management |
Parameter Class |
Parameters About Radio Resources |
Caution |
None |