Parameter Name |
TCH Rate Adjust Allow |
|---|---|
Description |
This parameter specifies whether a cell can convert full rate channels to half rate channels, or convert the half rate channels to full rate channels. If this parameter is set to Yes, the conversion is allowed; if the parameter is set to No, the conversion is not allowed. the TCHF that has been converted to the TCHH will be forcedly restored; the TCHH that has been converted to the TCHF will be forcedly restored. This parameter also specifies whether the channel supports the dynamic adjustment priority in the channel assignment algorithm. In the channel assignment, the channels on the TRX not supporting the dynamic adjustment are assigned first, to ensure the channels on the TRX supporting the dynamic adjustment are used for dynamic adjustment. Thus, the access requests of users are satisfied. |
GUI Value Range |
[No,Yes] |
Default Value |
No |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
None |
Recommended Value |
No |
Parameter Relationship |
None |
BSC Feature |
Channel Management |
Parameter Class |
Parameters About Radio Resources |
Caution |
None |