Parameter Name |
Allow Shutdown of TRX Power Amplifier |
|---|---|
Description |
This parameter specifies whether the BSC enables the power amplifier of a TRX based on the traffic volume. If you need to set this parameter to No, you should enable the power amplifier of the TRX if it is disabled. If this parameter is set to No, you should not disable the power amplifier of the TRX. |
GUI Value Range |
[No,Yes] |
Default Value |
No |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
None |
Recommended Value |
No |
Parameter Relationship |
None |
BSC Feature |
Intelligent Shutdown of the TRX Power Amplifier |
Parameter Class |
Parameters About Equipment |
Caution |
This parameter is configured only when the DTRU is used. This parameter cannot be configured for the TRXs on the main BCCH, for the TRXs participating in the baseband FH, for the TRXs in the cell configured with the hopping antenna, or for the TRXs in the cell configured with PDCHs. |