Parameter Name |
CicPoolList Send Flag In Ho Fail |
|---|---|
Description |
This parameter specifies whether the HO FAIL message carries the circuit pool list. This parameter should be set on the basis of whether the MSC supports the HO FAIL message carrying the circuit pool list. Therefore, the MSC can process the HO FAIL message properly. |
GUI Value Range |
[Not Sending,Sending According to Protocol,Unconditionally Sending] |
Default Value |
Not Sending |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
This parameter should be set on the basis of the negotiation with the MSC at the peer end so that the MSC can process the HO FAIL message properly. |
Recommended Value |
Not Sending |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Equipment |
Caution |
The value Sending According to Protocol indicates the following: The HO FAIL message carries the circuit pool list only when the cause value of the handover failure is Circuit pool mismatch or Switch circuit pool; otherwise, the message does not carry the circuit pool list. |