Parameter Name |
Extended Cell Throughput Enhancement |
|---|---|
Description |
This parameter specifies whether to enable the downlink throughput enhancement function in the double-timeslot cell. If this parameter is set to Open, the downlink PS services can be processed on the odd-numbered channels on the underlaid TRXs in the double-timeslot extended cell, and thus improve the downlink throughput. If this parameter is set to Close, the PS services cannot be processed on the odd-numbered channels on the underlaid TRXs in the double-timeslot extended cell. |
GUI Value Range |
[Open,Close] |
Default Value |
Close |
Unit |
None |
Step |
- |
Modification Rules |
Modifying this parameter leads to cell reset. |
Configuration Policy |
If this parameter is set to Open, then the downlink PS services can be processed on the odd-numbered channels on the underlaid TRXs in the double-timeslot extended cell, and thus improve the downlink throughput. If this parameter is set to Close, then the packet services cannot be processed on the odd-numbered channels on the underlaid TRXs in the double-timeslot extended cell. |
Recommended Value |
Open |
Parameter Relationship |
None |
BSC Feature |
GPRS&EGPRS |
Parameter Class |
Parameters About Radio Resources |
Caution |
This function applies to only the built-in PCU. At present, only the BTS3012 supports this function. For the BTS in TDM transmission mode, sufficient idle timeslots needs to be configured. |