Parameter Name |
Uplink Default MCS Type |
|---|---|
Description |
This parameter specifies the default MCS type used on the EDGE-enabled uplink. To dynamically adjust the MCS type of the uplink, you should set the MCS type for transmitting the first TBF through this parameter. Then, you dynamically adjust the MCS types of other TBFs based on the signal transmission quality. To fixedly use an MCS type on the uplink, you should fixedly use an MCS type for all TBFs. |
GUI Value Range |
[MCS1,MCS2,MCS3,MCS4,MCS5,MCS6,MCS7,MCS8,MCS9] |
Default Value |
MCS2 |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
None |
Recommended Value |
MCS2 |
Parameter Relationship |
Uplink Fixed MCS Type |
BSC Feature |
EGPRS |
Parameter Class |
Parameters About Radio Resources |
Caution |
None |