Parameter Name |
Downlink Default MCS Type |
|---|---|
Description |
This parameter specifies the default MCS type used on the EDGE-enabled downlink. To dynamically adjust the MCS type of the downlink, you should set the MCS type for transmitting the first TBF through this parameter. Then, you should dynamically adjust the MCS types of other TBFs based on the signal transmission quality. To fixedly use an MCS type on the downlink, you should fixedly use an MCS type for all TBFs. |
GUI Value Range |
[MCS1,MCS2,MCS3,MCS4,MCS5,MCS6,MCS7,MCS8,MCS9] |
Default Value |
MCS6 |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
For the cell with the good Um interface quality, set the parameter to MCS6; for the cell with the poor Um interface quality, set the parameter to MCS4. |
Recommended Value |
MCS6 |
Parameter Relationship |
Downlink Fixed MCS Type |
BSC Feature |
EGPRS |
Parameter Class |
Parameters About Radio Resources |
Caution |
None |