Parameter Name |
Signal Strength Filter Period in Idle Mode |
|---|---|
Description |
This parameter specifies the signal strength filter period in the packet idle mode, which is used to set the signal strength filter period of the MS in the packet idle mode. This parameter is used by the signal strength filter for power control to periodically filter the signal level in the idle mode. This parameter is used when the MS measures the downlink signal strength in the packet idle mode and calculates Cn of the MS output power. The parameter specifies the relation between Cn and Cn-1. |
GUI Value Range |
[0,25] |
Default Value |
10 |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
If this parameter is set to a higher value, the influence of Cn-1 on Cn increases; if this parameter is set to a lower value, the influence of Cn-1 on Cn decreases. |
Recommended Value |
10 |
Parameter Relationship |
None |
BSC Feature |
GPRS&EGPRS |
Parameter Class |
Parameters About Radio Resources |
Caution |
None |