Parameter Name |
Standby IP Address |
|---|---|
Description |
This parameter specifies the port IP address of the standby IP interface board when the IP interface boards are configured in active/standby mode. |
GUI Value Range |
[0.0.0.0,255.255.255.255] |
Default Value |
255.255.255.255 |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
None |
Recommended Value |
None |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Radio Resources |
Caution |
The IP addresses of the active and standby boards must belong to the same network segment. |