Parameter Name |
VLAN Flag |
|---|---|
Description |
This parameter specifies whether the VLAN flag is contained in the ARP message when the BSC performs ARP detection. |
GUI Value Range |
[DISABLE,ENABLE] |
Default Value |
DISABLE |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
When the VLAN function is enabled for the equipment port to which the gateway address of the route is configured, this parameter must be set to Enable, and the VLAN ID must be the same as the VLAN ID of the equipment port. Otherwise, the route is inaccessible. |
Recommended Value |
None |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Radio Resources |
Caution |
None |