Parameter Name |
Penalty Value on Load HO |
|---|---|
Description |
After a load handover is successfully performed, the BSC gives a penalty to the original serving cell, that is, subtracts the Penalty Value on Load HO from the level of the original serving cell during the Penalty Time on Load HO. |
GUI Value Range |
[0,63] |
Default Value |
63 |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
The greater the value of this parameter, the more difficult the call is to be handed over to the original cell. If this parameter is set to 0, no penalty is given to the original cell. If this parameter is set to 63, the call is hardly handed over to the original cell during the time specified by the Penalty Time on Load HO. |
Recommended Value |
63 |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Radio Resources |
Caution |
This parameter is valid only when the HO Control Switch is set to HO Algorithm II. This parameter is invalid when the HO Control Switch is set to HO Algorithm I. |