Parameter Name |
IntraCell TCHH-TCHF ATCB Offset Overlay |
|---|---|
Description |
This parameter specifies the ATCB difference between the overlaid subcell and the underlaid subcell. This parameter, along with the IntraCell AMR TCHH-TCHF Ho ATCB Threshold, determines whether a condition for deciding a TCHH-TCHF handover is met. |
GUI Value Range |
[0,255] |
Default Value |
20 |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
If this parameter is set to a too great value, only an MS close to the overlaid subcell can be assigned TCHHs. Thus, timeslots are wasted. If this parameter is set to a too small value, an MS of bad quality on the edge of the overlaid subcell cannot be handed over from TCHH to TCHF. Thus, the quality of the call cannot be improved. |
Recommended Value |
20 |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Radio Resources |
Caution |
This parameter is available only when HO Control Switch is set to HO Algorithm II. This parameter is invalid when the HO Control Switch is set to HO Algorithm I. |