Parameter Name |
IntraCell Non-AMR TCHH-TCHF Traffic Threshold |
|---|---|
Description |
When the cell load is equal to or smaller than this threshold, the BSC enables the non-AMR TCHH-TCHF handover. When the network load is smaller than this threshold, the BSC hand over all half-rate MSs to full-rate services. |
GUI Value Range |
[0,100] |
Default Value |
25 |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
If this parameter is set too large, the TCHH-TCHF handover is triggered when the network is heavily loaded; therefore, the network load changes greatly and the network might be congested again. If this parameter is set too small, the TCHH-TCHF handover is triggered when the network is lightly loaded, which causes unnecessary decrease in the MOS of the MS. |
Recommended Value |
25 |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Radio Resources |
Caution |
This parameter can be configured only when HO Control Switch is set to HO Algorithm II; this parameter is invalid when HO Control Switch is set to HO Algorithm I. |