Parameter Name |
Test Code Length |
|---|---|
Description |
After the A interface starts to work, a signaling link test message is transmitted on the SS7 signaling link at an interval of one minute to check whether the signaling link is active. The message contains a test code. This parameter specifies the value of each byte in the test code. |
GUI Value Range |
[1,15] |
Default Value |
6 |
Unit |
Byte |
Step |
- |
Modification Rules |
None |
Configuration Policy |
None |
Recommended Value |
6 |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Transmission |
Caution |
None |