R3830a:CELL_LOCALSWITCH_BTSLOOP_HO_BSCLOOP_SUCCESS
A handover is initiated in the stable BTS loopback state (BTS loopback is successful and the calling and called MSs are in loopback state). After the handover, the BSC loopback procedure is restarted. The BSC determines the loopback start conditions, performs BSC local switch call detection, sends a BSC loopback start request message, adjusts the speech versions of the calling and called MSs, and performs network arrangement. If all these actions are successful, the BSC loopback is successful.
This measurement provides the number of successful BSC loopback attempts after the handover during the BTS loopback.
Integer number or integer.
A handover is performed in the stable BTS loopback state. After the handover, the BSC loopback procedure is restarted. The loopback start conditions are determined, the BSC local switch call detection is performed, the call processing module initiating loopback start at one end sends a loopback request message to the call processing module at the peer end, the speech versions of the calling and called MSs are adjusted, and the network arrangement is performed. If the call processing module at the peer end responds with a loopback acknowledgement message (loopback success), this counter is measured in the cell where the loopback start is initiated.
This is an original counter without involving any formula.