BSC Configuration Data Types

Based on the system requirements and the location for saving the data, the BSC configuration data is classified into different types.

The BSC configuration data is classified into LMT configuration data, GBAM configuration data, and GOMU configuration data in terms of the data location.

• LMT configuration data

  In offline configuration mode, you can configure the BSC data by using the data configuration wizards, and then save the configuration data in the LMT memory. You can save the configuration data by backing up the local data.

• Based on the hardware configuration types, the BSC configuration data is classified into the GBAM configuration data and GOMU configuration data.

  • GBAM configuration data: The data, saved in the GBAM memory database and on the GBAM hard disk, provides the basis for the operation of the GBAM. After dynamic configuration, the GBAM updates the data in the memory database and the data files on the hard disk.
  • GOMU configuration data: The data, saved in the database of the GOMU memory, provides the basis for the operation of the GOMU. After dynamic configuration, the GOMU updates the data in the GOMU memory database.

Based on system requirements, the BSC configuration data is classified into the minimum configuration data and the dynamic configuration data.

• Minimum configuration data

  The minimum configuration data is provided by the system automatically and is saved in the directory \LMT installation directory\BSC6000\software version\Cfg\SysData. The configured data is the minimum configuration data for the normal operation of the LMT in offline mode. The minimum configuration data of the GBAM server, front GOMU board, and rear GOMU board is mini_Cfg_lmt12.DAT, mini_Cfg_Prefix_lmt0.DAT, and mini_Cfg_Post_lmt0.DAT.

• Dynamic configuration data

  The dynamic configuration data is generated on the GBAM/GOMU when you perform configurations on the LMT in online mode.

NOTE:

The files in the directory \LMT installation directory\BSC6000\software version\Cfg\SysData are mandatory for the normal operation of the LMT. The files cannot be modified or deleted.