Microsoft Exchange Server Schedule+ Registry Reference

This section provides the details on the registry settings used by Schedule+.

The following rules apply to these registry keys.

For Boolean keys, zero or no value means false, non-zero means true.
The default is zero, false, or empty unless otherwise noted.
Default values are absent from .ini files unless otherwise noted by the comment "(always present)", meaning after exiting Schedule+ online once.
Supported color values are 1 through 16 inclusive.

Caution You should not change any of the Microsoft Exchange Server registry key values unless you are familiar with the full effect of the change.

Under Registry Key:
Hkey_local_machine\Software\Microsoft\Schedule+\Application

Name	Type	Default Value	Description

AutoScanDisabled	REG_DWORD	0	1 – autoscan disabled, 0 – autoscan enabled Setting this registry key to 1 turns off all background processing of Schedule+ mail, including Auto-Accept, Auto-Delete, Auto-processing of responses (including deletion of silent responses), and Auto-forward (for MS Mail clients).
PollTime		600	Number of seconds between polling intervals.
LocalUser			(Should always be present.)
LocalPath			Path where the local Schedule+ file exists. (Should always be present.)
AppPath			Path where Schedule+ exe will be found initialized by the setup program, or when App runs.
CDPath			Path where the DLLs are located. Setup program initializes this. Will be different from AppPath if the user chooses to install in "Run from CD" mode, in which case we only install the .Exe on the local drive.
OfficeInstalled			Set to 1 if Schedule+ was installed with Microsoft Office.
MailDisabled			Do not attempt to load and start MAPI and open a server file
FormsRegistered			Indicates that the MAPI forms have been registered.
ServerPath			Path to server, for example, \\davewh5server\po
TransportList			Name of transport list, for example, Xpt.xpt
ScheduleFinders			Names of transport DLLs, such as Mstre
ScheduleInterfaces			Names of interface DLLs, such as Msscd
DefaultLocalPath			Primer path for 'choose local path' dialog at initialization time.
PrimaryServer			Indicates whether you should give the user the option to choose a local file.
WatchInstalled			Indicates watch export DLL installed.
OptionsTab			The last options tab selected by user.
OptionsFilePath			If this exists, it must be a valid path that points to a VUE file. Otherwise, the username is used to create a VUE file that resides in the Windows directory.
RecoverAll			Indicates that header errors should be treated as file corruptions rather than version errors. When the file header is corrupt the file may look like it is not a Schedule+ file. Normally the code treats this as a foreign file type and does not try to recover the file. When this key is set to 1, the code treats the file as if it were corrupt.
ApptBookLinesColor
GridLinesColor
GridTextColor
TentativeApptColor
Ex-Import Stuff
ExportRange			Default: All (entire file)
ImportNoDupCheck			If set to 1, greatly speeds up CSV imports by not checking for duplicates.
ImportNoDupCheck			k ; if ; if set to 1, greatly speeds up CSV imports by not checking for duplicates
ImportDoNotAsk AboutConflicts
ArchiveFile			Archive path/filename
ExportFile			Most recent export path/filename
ReminderToTop			Default: 5 (in minutes) to bring reminders to top, range 1 - 60 inclusive
SchdplusReminder			Default: ".\Msremind.wav" (name of reminder wave file)
NewTaskGridIgnoreNoDueDate			Whether to exclude tasks with no due date (useful for daily reminder)
GridAutoFit			Resize columns to fit when resizing window/grid
DemosEnabled			Whether to allow Demos menu command
DefaultPrinter			Was the last printer used the default printer? 0/1
LocalPrintFileDir			Points to the location of the .prt files. no default!
GrayShade			Default: 230 range is 0 (black) to 255 (white)
PCLGrayPercent			Default: 15 range is 0 to 100 (%)
NoHPTypeLines
NoToolBar
NoStatusBar
CoverBitmap			Path to Windows bitmap file
UpdateCover			Default: 120 (in minutes) between updates of cover page
NoNewContactSpaceJump			Don't jump from first to last name on space in new contact
DefaultNetPassword			Default: no default password

SyncStartIdle			Default: 6000 number of csecs to wait after a user action before continuing synchronization
PrimaryServer			Default: 0. Working primarily from Server file? This flag only reflects the default setting for new users on the machine. If the user changes this setting, the change will be saved in the profile, not the registry.
ShowRecurInstances			Default: 1 (most 32)
InitialAccess			Default: 0 (read_minimal) 1 = none, 2 = read

[Watch Wizard]
PhoneShowNormal		0	Shows names normally (for example, "first last" instead of "last, first"). Note that in most cases we want to show "last, first" because the Watch sorts the textized string that we send it.

[Microsoft Schedule+]
PollTime			Default: 6000 (in centiseconds)
DefaultRemindAgain=
DefaultRemindAgain Amount			Default: 5
DefaultRemindAgain Units			Default: minutes