DSCAPS

The DSCAPS structure specifies the capabilities of a DirectSound device for use by the IDirectSound::GetCaps method.

typedef { 
    DWORD  dwSize; 
    DWORD  dwFlags;  
    DWORD  dwMinSecondarySampleRate; 
    DWORD  dwMaxSecondarySampleRate; 
    DWORD  dwPrimaryBuffers; 
    DWORD  dwMaxHwMixingAllBuffers; 
    DWORD  dwMaxHwMixingStaticBuffers; 
    DWORD  dwMaxHwMixingStreamingBuffers; 
    DWORD  dwFreeHwMixingAllBuffers; 
    DWORD  dwFreeHwMixingStaticBuffers; 
    DWORD  dwFreeHwMixingStreamingBuffers; 
    DWORD  dwMaxHw3DAllBuffers; 
    DWORD  dwMaxHw3DStaticBuffers; 
    DWORD  dwMaxHw3DStreamingBuffers; 
    DWORD  dwFreeHw3DAllBuffers; 
    DWORD  dwFreeHw3DStaticBuffers; 
    DWORD  dwFreeHw3DStreamingBuffers; 
    DWORD  dwTotalHwMemBytes; 
    DWORD  dwFreeHwMemBytes; 
    DWORD  dwMaxContigFreeHwMemBytes; 
    DWORD  dwUnlockTransferRateHwBuffers; 
    DWORD  dwPlayCpuOverheadSwBuffers; 
    DWORD  dwReserved1; 
    DWORD  dwReserved2; 
} DSCAPS, *LPDSCAPS; 
 
typedef const DSCAPS *LPCDSCAPS;

Members

dwSize

Size of the structure, in bytes. This member must be initialized before the structure is used.

dwFlags

Specifies device capabilities. Can be one or more of the following:

DSCAPS_CERTIFIED
	This driver has been tested and certified by Microsoft.
DSCAPS_CONTINUOUSRATE
	The device supports all sample rates between the dwMinSecondarySampleRate and dwMaxSecondarySampleRate member values. Typically, this means that the actual output rate will be within +/- 10 hertz (Hz) of the requested frequency.
DSCAPS_EMULDRIVER
	The device does not have a DirectSound driver installed, so it is being emulated through the waveform-audio functions. Performance degradation should be expected.
DSCAPS_PRIMARY16BIT
	The device supports primary sound buffers with 16-bit samples.
DSCAPS_PRIMARY8BIT
	The device supports primary buffers with 8-bit samples.
DSCAPS_PRIMARYMONO
	The device supports monophonic primary buffers.
DSCAPS_PRIMARYSTEREO
	The device supports stereo primary buffers.
DSCAPS_SECONDARY16BIT
	The device supports hardware-mixed secondary sound buffers with 16-bit samples.
DSCAPS_SECONDARY8BIT
	The device supports hardware-mixed secondary buffers with 8-bit samples.
DSCAPS_SECONDARYMONO
	The device supports hardware-mixed monophonic secondary buffers.
DSCAPS_SECONDARYSTEREO
	The device supports hardware-mixed stereo secondary buffers.

dwMinSecondarySampleRate and dwMaxSecondarySampleRate

Minimum and maximum sample rate specifications that are supported by this device's hardware secondary sound buffers.

dwPrimaryBuffers

Number of primary buffers supported. This value will always be 1.

dwMaxHwMixingAllBuffers

Specifies the total number of buffers that can be mixed in hardware. This member can be less than the sum of dwMaxHwMixingStaticBuffers and dwMaxHwMixingStreamingBuffers. Resource tradeoffs frequently occur.

dwMaxHwMixingStaticBuffers

Specifies the maximum number of static sound buffers.

dwMaxHwMixingStreamingBuffers

Specifies the maximum number of streaming sound buffers.

dwFreeHwMixingAllBuffers, dwFreeHwMixingStaticBuffers, and dwFreeHwMixingStreamingBuffers

Description of the free, or unallocated, hardware mixing capabilities of the device. An application can use these values to determine whether hardware resources are available for allocation to a secondary sound buffer. Also, by comparing these values to the members that specify maximum mixing capabilities, the resources that are already allocated can be determined.

dwMaxHw3DAllBuffers, dwMaxHw3DStaticBuffers, and dwMaxHw3DStreamingBuffers

Description of the hardware 3-D positional capabilities of the device.

dwFreeHw3DAllBuffers, dwFreeHw3DStaticBuffers, and dwFreeHw3DStreamingBuffers

Description of the free, or unallocated, hardware 3-D positional capabilities of the device.

dwTotalHwMemBytes

Size, in bytes, of the amount of memory on the sound card that stores static sound buffers.

dwFreeHwMemBytes

Size, in bytes, of the free memory on the sound card.

dwMaxContigFreeHwMemBytes

Size, in bytes, of the largest contiguous block of free memory on the sound card.

dwUnlockTransferRateHwBuffers

Description of the rate, in kilobytes per second, at which data can be transferred to hardware static sound buffers (those located in on-board sound memory). This and the number of bytes transferred determines the duration of a call to the IDirectSoundBuffer::Unlock method.

dwPlayCpuOverheadSwBuffers

Description of the processing overhead, as a percentage of the central processing unit, needed to mix software buffers (those located in main system memory). This varies according to the bus type, the processor type, and the clock speed.

The unlock transfer rate for software buffers is 0 because the data need not be transferred anywhere. Similarly, the play processing overhead for hardware buffers is 0 because the mixing is done by the sound device.

dwReserved1 and dwReserved2

Reserved for future use.

QuickInfo

  Windows NT: Use version 4.0 or later.
  Windows: Use Windows 95 or later. Available as a redistributable for Windows 95.
  Windows CE: Unsupported.
  Header: Declared in dsound.h.

See Also

IDirectSound::GetCaps