The items in this section are requirements for Plug and Play capabilities. For Plug and Play requirements related to the parallel port on the PC, see the "Serial, Parallel, and Wireless Support" chapter in Part 3, or see the related bus port requirements in Part 3 of this guide.
11. Support Plug and Play for all supported buses
| Required |
Complete Plug and Play support must be implemented for all buses that the device supports. For information about the Plug and Play requirements, see the related bus-class definitions in Part 3 of this guide.
12. Plug and Play device identifier
| Required |
All devices for all buses must supply a human-readable device ID in the manner required for the bus it uses. The device ID requirements for each bus are defined in Part 3 of this guide, except the device ID requirements for devices that use the parallel port are defined in the IEEE 1284 specification, as summarized in the "Serial, Parallel, and Wireless Support" chapter in this guide.