PC Ext: Explanation of Opportunistic Locking on Windows NT

Last reviewed: November 12, 1997
Article ID: Q129202
The information in this article applies to:
  • Microsoft Mail for PC Networks versions 3.0, 3.2, and 3.2a
  • Microsoft Windows NT Workstation version 3.5, 3.51, and 4.0
  • Microsoft Windows NT Server version 3.5, 3.51, and 4.0

SUMMARY

With Exclusive Oplock, if a file is opened in a non-exclusive (deny none) mode, the redirector requests an opportunistic lock of the entire file. As long as no other process has the file open, the server will grant this oplock, giving the redirector exclusive access to the specified file. This will allow the redirector to perform read-ahead, write-behind, and lock caching, as long as no other process tries to open the file.

When a second process attempts to open the file, the original owner will be asked to Break Oplock or Break to Level II Oplock. At that point, the redirector must invalidate cached data, flush writes and locks, and release the oplock, or close the file.

Opportunistic Locking level II, provides a method for granting read access to a file by more than one workstation, and these workstations can cache read data locally (read-ahead). As long as no station writes to the file, multiple stations can have the file open with level II oplock.

MORE INFORMATION

An illustration of how level II oplocks work:

  1. Station 1 opens the file, requesting oplock.

  2. Since no other station has the file open, the server grants station 1 exclusive oplock.

  3. Station 2 opens the file, requesting oplock.

  4. Since station 1 has not yet written to the file, the server asks station 1 to Break to Level II Oplock.

  5. Station 1 complies by flushing locally buffered lock information to the server.

  6. Station 1 informs the server that it has Broken to Level II Oplock (alternatively, station 1 could have closed the file).

  7. The server responds to station 2's open request, granting it level II oplock. Other stations can likewise open the file and obtain level II oplock.

  8. Station 2 (or any station that has the file open) sends a write request SMB. The server returns the write response.

  9. The server asks all stations that have the file open to Break to None, meaning no station holds any oplock on the file. Because the workstations can have no cached writes or locks at this point, they need not respond to the break-to-none advisory; all they need do is invalidate locally cashed read-ahead data.

The following registry entries are used to enable or disable oplocks for Windows NT workstation or server. These registry keys may not exist by default. To access the registry run REGEDT32.EXE from the File menu, choose Run in Program Manager or File Manager.

WARNING: Using Registry Editor incorrectly can cause serious, system-wide problems that may require you to reinstall Windows NT to correct them. Microsoft cannot guarantee that any problems resulting from the use of Registry Editor can be solved. Use this tool at your own risk.

Workstation Service Entries

\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet

   \Services\LanmanWorkstation\Parameters

UseOpportunisticLocking   REG_DWORD   0 or 1
Default: 1 (true)

Indicates whether the redirector should use opportunistic-locking (oplock) performance enhancement. This parameter should be disabled only to isolate problems.

Server Service Entries

\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet

   \Services\LanmanServer\Parameters

EnableOplocks   REG_DWORD   0 or 1
Default: 1 (true)

Specifies whether the server allows clients to use oplocks on files. Oplocks are a significant performance enhancement, but have the potential to cause lost cached data on some networks, particularly wide-area networks.

MinLinkThroughput   REG_DWORD   0 to infinite bytes per second
Default: 0

Specifies the minimum link throughput allowed by the server before it disables raw and opportunistic locks for this connection.

MaxLinkDelay   REG_DWORD   0 to 100,000 seconds
Default: 60

Specifies the maximum time allowed for a link delay. If delays exceed this number, the server disables raw I/O and opportunistic locking for this connection.

OplockBreakWait   REG_DWORD   10 to 180 seconds
Default: 35

Specifies the time that the server waits for a client to respond to an oplock break request. Smaller values can allow detection of crashed clients more quickly but can potentially cause loss of cached data.


Additional query words: prodnt
Keywords : MailPCExt ntgeneral kbusage kbusage
Version : 3.0 3.2 3.2a 3.50 3.51 4.00
Platform : WINDOWS


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: November 12, 1997
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.