Contents of the Connectivity Kit ORACLE.TXT File

Last reviewed: April 30, 1996
Article ID: Q108821
The information in this article applies to:
  • Microsoft FoxPro Connectivity Kit for Windows, version 2.5
  • Microsoft FoxPro for Windows, versions 2.5, 2.5a, and 2.5b

SUMMARY

Below is the complete FoxPro Connectivity Kit ORACLE.TXT file.

If you run SETUP.EXE from the ODBC Setup disk (Disk 2 of the Connectivity Kit) to perform an ODBC setup, the ORACLE.TXT file is installed in the Windows SYSTEM subdirectory.

You can also view the ORACLE.TXT directly from the ODBC Setup disk.

NOTE: There is no MS-DOS driver to connect to ORACLE. The .PLB file that is included with the Connectivity Kit works only with Microsoft SQL Server and SYBASE server. If you want to connect to ORACLE from MS-DOS, you will have create your own .PLB file or get a third-party driver.

MORE INFORMATION

                   SETTING UP THE ODBC ORACLE DRIVER FOR
                   USE WITH THE SQL*NET FOR WINDOWS DLLs
                   =====================================

This file discusses how to set up the ODBC ORACLE driver to run with your ORACLE Server software. To use the ODBC ORACLE driver with any large application, such as Microsoft Access, you must use the SQL*Net for Windows DLLs. Because the ODBC ORACLE driver is designed to use ORACLE Server version 6 and the SQL*Net for Windows DLLs are designed to use ORACLE Server version 7, you must be careful to configure your system correctly.

If you do not have the SQL*Net for Windows DLLs, or, after following the instructions in this file, you are still unable to connect to ORACLE Server with SQL*Net, you can contact Oracle Corp. at 1-800-345-DBMS.

(Additional information not included in this ORACLE.TXT file: The Microsoft ODBC Driver Pack version 2.0 contains the Oracle 7 driver.)

If ORACLE Server version 6 is already installed on your system

To set up the ODBC ORACLE driver and the SQL*Net for Windows DLLs if you already have ORACLE Server version 6 on your system:

  1. Make sure you have the correct versions of ORACLE products, including at least one SQL*Net protocol.

           Product                                  Version
           ---------------------------------------------------
    
           ORACLE Installer                         3.0.8.3.7
           Required Support Files                   7.0.12.1.0
           SQL*Net Named Pipes for Windows          1.1.1.3
           SQL*Net SPX for Windows                  1.1.1.5
           SQL*Net TCP/IP for Windows               1.1.7.6
    
    

  2. Test your current SQL*Net connection by using an ORACLE tool such as SQL*Plus for Windows.

  3. Search for and delete all copies of ORA6WIN.DLL from your system. A new (backwards compatible) version of ORA6WIN.DLL will be installed with the ODBC ORACLE driver.

  4. Run the ORACLE Installer program. When asked for your ORACLE installation directory, use the suggested default directory C:\ORAWIN.

  5. Run the ORACLE Installer in the ORACLE group in the Program Manager:

    a. Install the files from the Required Support Files disk.

    b. Install the SQL*Net protocol you will be using. For more information, see the ORACLE documentation.

  6. If the following line exists, remove it from your AUTOEXEC.BAT file:

    SET CONFIG=<oracle_configuration_file>

    Add the following line to your AUTOEXEC.BAT file:

    SET CONFIG_FILES=C:\WINDOWS\ORACLE.INI

    NOTE: If you are using the MS-DOS 6.0 operating system, add the following line to the end of your AUTOEXEC.BAT file:

    SET CONFIG=

    ORACLE Server first checks the CONFIG environment variable for the path of the ORACLE configuration file. If the CONFIG variable is not set, ORACLE Server checks the CONFIG_FILES variable. Because MS-DOS 6.0 can use the CONFIG environment variable during system startup, you must clear this variable before leaving your AUTOEXEC.BAT file. Otherwise, ORACLE Server will use its value as the path of the ORACLE configuration file.

  7. Make sure your PATH variable includes the BIN subdirectories of your <oraclehome> directory and the \ORAWIN directory. For example, if your <oraclehome> directory is C:\ORACLE6, add the following line to your AUTOEXEC.BAT file:

    SET PATH=%PATH%;C:\ORACLE6\BIN;C:\ORAWIN\BIN

  8. Paste the contents of your CONFIG.ORA file at the start of your ORACLE.INI file. For example, if your CONFIG.ORA file contains:

    LANGUAGE=American_America.US7ASCII ORACLE_HOME=C:\ORACLE6 MACHINE_TYPE=J SQLPATH=C:\ORACLE6 WIN_REMOTE_SESSIONS=3 LOCAL=p:MyServer

    and your ORACLE.INI file contains:

    [Oracle] ORACLE_HOME=C:\ORAWIN LANGUAGE=American_America.US7ASCII NLS_LANG=ENGLISH WIN_LOCAL_SESSIONS=1 TCP_VENDOR=LANMAN TCP_SERVICES_FILE=C:\WINDOWS\SERVICES

    then your modified ORACLE.INI file should contain:

    LANGUAGE=American_America.US7ASCII ORACLE_HOME=C:\ORACLE6 MACHINE_TYPE=J SQLPATH=C:\ORACLE6 WIN_REMOTE_SESSIONS=3 LOCAL=p:MyServer

    [Oracle] ORACLE_HOME=C:\ORAWIN LANGUAGE=American_America.US7ASCII NLS_LANG=ENGLISH WIN_LOCAL_SESSIONS=1 TCP_VENDOR=LANMAN TCP_SERVICES_FILE=C:\WINDOWS\SERVICES

    Note that the ORACLE_HOME variable is set twice, once to point to the version 6 <oraclehome> directory and once to point to C:\ORAWIN.

  9. If it is not already running, start Windows. Insert the ODBC Setup disk in drive A, choose Run from the Windows Program Manager (or File Manager) File menu, and then type "a:\setup.exe" in the Command Line box. For information about using the ODBC Setup program, see the online Help.

  10. Run the ODBC Control Panel option and add a data source for your ORACLE server. For information about using the ODBC Control Panel option, see the online Help

You should now be able to run the ODBC ORACLE driver. You should also be able to run ORACLE version 6 and version 7 tools and applications written for Windows. All of these can run over SQL*Net for Windows DLLs.

NOTE: Due to differences in memory use, this configuration may not allow you to run ORACLE MS-DOS-only tools or applications.

If ORACLE Server is not installed on your system

To set up the ODBC ORACLE driver and the SQL*Net for Windows DLLs if you do not have any versions of ORACLE Server on your system:

  1. Make sure that you have the correct versions of ORACLE products, including at least one SQL*Net protocol.

           Product                                  Version
           ---------------------------------------------------
    
           ORACLE Installer                         3.0.8.3.7
           Required Support Files                   7.0.12.1.0
           SQL*Net Named Pipes for Windows          1.1.1.3
           SQL*Net SPX for Windows                  1.1.1.5
           SQL*Net TCP/IP for Windows               1.1.7.6
    
    
    

  2. Install the network software connecting your client workstation to the server and check that a connection can be made. For example, for the TCP/IP protocol, type "ping <servername>". This connection must work before you install the SQL*Net for Windows DLLs.

  3. Run the ORACLE Installer program. When asked for your ORACLE installation directory, use the suggested default directory C:\ORAWIN.

  4. Run the ORACLE Installer in the ORACLE group in the Program Manager:

    a. Install the files from the Required Support Files disk.

    b. Install the SQL*Net protocol you will be using. For more information, see the ORACLE documentation.

  5. Add the following line to your AUTOEXEC.BAT file:

    SET CONFIG_FILES=C:\WINDOWS\ORACLE.INI

    NOTE: If you are using MS-DOS 6.0, add the following line to the end of your AUTOEXEC.BAT file:

    SET CONFIG=

    ORACLE Server first checks the CONFIG environment variable for the path of the ORACLE configuration file. If the CONFIG variable is not set, ORACLE Server checks the CONFIG_FILES variable. Because MS-DOS 6.0 can use the CONFIG environment variable during system startup, you must clear this variable before leaving your AUTOEXEC.BAT file. Otherwise, ORACLE Server will use its value as the path of the ORACLE configuration file.

  6. Make sure your PATH variable includes the C:\ORAWIN\BIN directory. To do this, add the following line to your AUTOEXEC.BAT file:

            SET PATH=%PATH%;C:\ORAWIN\BIN
    
    

  7. So that the ODBC ORACLE driver can use ORACLE version 7 error messages, copy the version 7 error messages to the directory where the ODBC ORACLE driver searches for error messages:

            COPY C:\ORAWIN\RDBMS70\*.MSB C:\ORAWIN\DBS
    
    

  8. Search for and delete all copies of ORA6WIN.DLL from your system. A new (backwards compatible) version of ORA6WIN.DLL will be installed with the ODBC ORACLE driver.

  9. If it is not already running, start Windows. Insert the ODBC Setup disk in drive A, choose Run from the Windows Program Manager (or File Manager) File menu, and then type "a:\setup.exe" in the Command Line box. For information about using the ODBC setup program, see the online Help.

  10. Run the ODBC Control Panel option and add a data source for your ORACLE server. For information about using the ODBC Control Panel option, see the online Help.

You should now be able to run the ODBC ORACLE driver.

ORACLE Error Messages

The following section explains what to do when you encounter various error messages from ORACLE Server through the ODBC ORACLE driver.

ORA-xxxxx Message not found; product = RDBMS; facility = ORA; language = NULL

The ODBC ORACLE driver searches for error messages in the subdirectory that normally contains the ORACLE version 6 error messages. If you receive this error, it means that the ODBC ORACLE driver cannot find the error messages. To fix this:

  1. Check that the CONFIG_FILES variable is set in your AUTOEXEC.BAT file and that it points to your ORACLE configuration file (ORACLE.INI). If you are using MS-DOS 6.0, check that the CONFIG environment variable is either not set or is cleared in the last line of your AUTOEXEC.BAT file.

  2. Check that the ORACLE_HOME variable is set correctly in your C:\WINDOWS\ORACLE.INI file.

    If ORACLE Server version 6 was already installed on your system, ORACLE_HOME should be set twice. The first time, it should be set to your version 6 <oraclehome> directory, usually C:\ORACLE6. The second time, in the [Oracle] section of the file, it should be set to C:\ORAWIN.

    If ORACLE Server was not installed on your system, ORACLE_HOME should be set to C:\ORAWIN.

  3. If you did not have any ORACLE software on your workstation, make sure that you copied all the .MSB files from C:\ORAWIN\RDBMS70 to C:\ORAWIN\DBS.

The ODBC ORACLE driver should now be able to print the ORACLE Server error message, enabling you to fix the problem that generated the error.

ORA-03121 No interface driver connected -- function not performed

The ODBC ORACLE driver cannot find ORA6WIN.DLL or one of the SQL*Net components. Check the following:

  1. Without running the ODBC ORACLE driver, make sure the network connection is valid. For example, type "ping <servername>" for a TCP/IP connection.

  2. Search for and delete old versions of ORA6WIN.DLL. The correct version of the ORA6WIN.DLL was installed by the ODBC ORACLE driver in the SYSTEM subdirectory of your Windows directory.

  3. Check that the PATH variable contains the BIN subdirectory of the <oraclehome> directory (usually C:\ORACLE6\BIN or C:\ORAWIN\BIN).

  4. Check that the CONFIG_FILES variable is set in your AUTOEXEC.BAT file and that it points to your ORACLE configuration file (ORACLE.INI). If you are using MS-DOS 6.0, check that the CONFIG environment variable is either not set or is cleared in the last line of your AUTOEXEC.BAT file.

  5. Check that SQLTCP.DLL (for TCP/IP), SQLSPX.DLL (for Novell NetWare IPX/SPX), or SQLNMP.DLL (for Named Pipes) is in the ORACLE BIN directory specified in the PATH variable. (If not, SQL*Net was not installed correctly.)

  6. Check that ORA7WIN.DLL and COREWIN.DLL are in the ORACLE BIN directory specified in the PATH variable. (If not, SQL*Net was not installed correctly.)

ORA-06120 NETTCP: network driver not loaded

This error can occur when ORA6WIN.DLL is loaded but cannot find another SQL*Net component, such as SQLTCP.DLL.

  1. Check that the directories containing the SQL*Net components are in your PATH variable.

  2. Check that the ORACLE_HOME variable is set correctly in your C:\WINDOWS\ORACLE.INI file.

    If ORACLE Server version 6 was already installed on your system, ORACLE_HOME should be set twice. The first time, it should be set to your version 6 <oraclehome> directory, usually C:\ORACLE6. The second time, in the [Oracle] section of the file, it should be set to C:\ORAWIN.

    If ORACLE Server was not installed on your system, ORACLE_HOME should be set to C:\ORAWIN.

  3. Search for and delete old versions of ORA6WIN.DLL. The correct version of the ORA6WIN.DLL was installed by the ODBC ORACLE driver in the SYSTEM subdirectory of your Windows directory.

  4. Check that you have followed all the instructions for the SQL*Net driver you are using. For example, for the SQL*Net for TCP/IP driver, make sure that all the TSRs, such as NMTSR and SOCKTSR, are loaded. (If not, SQL*Net was not installed correctly.)

ODBC Error Messages

The following section explains what to do when you encounter various ODBC error messages.

IM003   Driver specified by data source could not be loaded

The ODBC Driver Manager is attempting to load the ODBC ORACLE driver (SQORA.DLL). SQORA.DLL loads ORA6WIN.DLL to connect to the ORACLE server. You can receive this message if it cannot find ORA6WIN.DLL or finds the wrong version of ORA6WIN.DLL.

  1. Search for and delete old versions of ORA6WIN.DLL. The correct version of the ORA6WIN.DLL was installed by the ODBC ORACLE driver in the SYSTEM subdirectory of your Windows directory.

  2. Make sure that ORA6WIN.DLL was installed when the ODBC ORACLE driver was installed.


Additional reference words: FoxWin CK 2.50 2.50a 2.50b novel
KBCategory: kbreadme kbinterop kbref kbtool
KBSubcategory: FxtoolCk


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: April 30, 1996
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.