How to Setup for a Remote Debug

Last reviewed: November 10, 1997
Article ID: Q169014

The information in this article applies to:

  • Microsoft Internet Information Server versions 2.0 and 3.0

SUMMARY

This article describes how to setup a remote debug for troubleshooting problems with your Internet Information Server (IIS). These steps should be followed after you consult a Microsoft Support Engineer and you agree that a debug is necessary.

MORE INFORMATION

Process 1 - To install the symbol files

This process should be used to enhance the output log of a Dr. Watson file. It should also be used in conjunction with Process 2 for a remote debug.

  1. Make sure you are running the latest Service Pack (SP) update to Microsoft Windows NT Server.

  2. Obtain the latest Service Pack symbols file from the Service Pack compact disc or our FTP site at ftp.microsoft.com in the following directory: bussys\winnt\winnt-public\fixes\usa\nt40\symbols\

    (use I for Intel or A for Alpha)

  3. If you install from the downloaded symbols file, type in the following command to install them:

    Filename -d Install Path

    where Filename is the downloaded file, and Install Path is the path to your Windows NT Server directory with \Symbols appended. For example, Sym_400I.exe -d C:\Winnt\Symbols.

  4. If you install from the SP compact disc, copy all subdirectories from the Support\Debug\Symbols directory to the Winnt\Symbols directory.

Process 2 - To set up for a debug

  1. Create a directory called Debug under your Windows NT directory.

  2. Unzip and copy the following files (from the Windows NT Resource Kit) to the debug directory you created: Tlist.exe (in the \Compdiag directory) Remote.exe (in the \Netadmin directory)

    If you do not have the resource kit, you can obtain these files from your Microsoft Support Engineer.

  3. Copy the .Exe and .Dll files located on the Windows NT compact disc (\Support\Debug\) to the Debug directory.

  4. Start a command window and change into your debug directory.

  5. Use Tlist.exe file to list the processes. Make a note of the ID for the Inetinfo.exe process. It is the number to the left of the process.

  6. Type in the following command (leaving quotes in place):

    Remote /s "cdb -p " debug

  7. At the debug prompt, type the following:

    .logopen c:\debug.txt

  8. Press g and ENTER to restart the inet service.

  9. Minimize the command window and wait for the server to stop. Contact your Support Engineer, and then start the remote session.

Process 3 - To set up RAS

  1. Make sure you have RAS service installed on a Windows NT Server

        on the network.
    

  2. Make sure that the RAS is set up to receive incoming calls.

  3. Create a user account that is a member of the administrators group.

        Ensure that the user has dial-in privileges.
    

Process 4 - To create a debug file

These steps can be used in case you get a crash, and you need to restart the computer before a Debug engineer can get back in touch with you.

  1. In the debug window, type the following:

          kv
    
18. Type the following:

      .logclose

  • Type q 20. You can now restart the server and mail the log file to the Support
        Engineer you are working with.
    
    Keywords          : iishowto kbother
    Version           : winnt:2.0,3.0
    Platform          : winnt
    Hardware          : ALPHA x86
    Issue type        : kbhowto

  • ================================================================================


    THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

    Last reviewed: November 10, 1997
    © 1998 Microsoft Corporation. All rights reserved. Terms of Use.