PC Win: Mailing to an Address Not Found in the Address List

Last reviewed: October 19, 1995
Article ID: Q89410
The information in this article applies to:
  • Microsoft Mail for Windows, version 3.0

SUMMARY

In the Microsoft Mail Windows client, you can send mail to users not found in the Postoffice Address List in one of two ways:

  • By enclosing the address in square brackets, [address], mail will not search the address list for a match. If the brackets are not used, the following error message is returned by mail when the names are checked:

          Some names could not be matched to names in the address
          list. Try correcting the names or choose Address to select
          names from the address list. Successfully matched names are
          underlined.
    

    These addresses must be enclosed in brackets and have a leading address type specified. Microsoft Mail is the default type used.

    Examples:

          MS Mail            [MS:Network/Postoffice/UserID]
          SMTP:              [SMTP:User@Host.Domain]
          Mail Connection    [MSMAIL:user@postoffice]
          X.400:             [X.400:/C=us/ADMD=mci/PRMD=widgits/PN=JohnDoe]
                       or    [X.400:/C=us/A=mci/P=widgits/S=JohnDoe]
    
       Note: Follow the steps below to see a sample of the address you are
       sending to. After creating the address into the mail message,
       double-click the name to see the actual address. You can also click
       the name in the Address window and click the Details button.
    
    
  • The names can also be manually entered by using the address windows, as follows:

    1. Select Compose Note.

    2. From the message toolbar, select the Address button.

    3. From the Address window, select the New Address icon. It is the

          blank card on the left of the address list.
    

    4. This brings up the New address window. Select the appropriate

          address type from the list and click the OK button.
    

    5. This brings up the New User dialog box. Fill in each box according

          to the requested information. The Alias is how it will look on the
          To line of the Mail message.
    

    6. Click the To button to add this name to the To: box of the

          Address window.
    

    7. Click the OK button when done adding in addresses and the names

          are added to the To: line of the message.
    

REFERENCES

Refer to page 277 of the 3.0 Administrator's Guide for a listing of many of the address types supported my Microsoft Mail for PC Networks.


Additional reference words: 3.00
KBCategory: kbusage
KBSubCategory: MailPCWin


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: October 19, 1995
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.