Client Functions Can't Use TCP/IP Sockets on SNA Server

Last reviewed: April 14, 1997
Article ID: Q165705
The information in this article applies to:
  • Microsoft SNA Server, versions 2.11 Service Pack 1, 2.11 Service Pack 2, and 3.0

SYMPTOMS

When running SNA Admin, SNA Manager, or any SNA applications on an SNA Server, the Admin/Manager program or SNA application always uses named pipes when communicating to other SNA Servers in the subdomain. There is no way to force SNA Admin or the SNA application to use a non-named pipe transport (such as TCP/IP sockets or IPX/SPX).

CAUSE

When initiating client functions from an SNA Server, the DMOD would always choose the first LAN transport configured, which always defaults to Microsoft Networking named pipes (Snalm.dll), even when named pipes is not selected during SNA Server Setup. The named pipe transport is always used on the SNA Server, because this transport supports file access to the shared SNA Server configuration file, which is always performed over Microsoft Networking.

RESOLUTION

Updates to SNA Server versions 2.11 (post Service Pack 2) and 3.0 are available to correct this problem. With this update applied on an SNA Server, SNA Server Admin (and other client functions) can now use TCP/IP sockets or other non-named pipe transport methods to communicate with other SNA Servers in the SNA subdomain.

Within SNA Server Setup, the administrator defines what client LAN transports the server will support. If both named pipes and TCP/IP sockets are chosen, then the following registry value must be added to allow SNA Admin (or any SNA application running on the SNA Server) to use TCP/IP sockets instead of named pipes:

   HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SnaBase\Parameters

   Value Name:  TransportBase
   Data Type:  REG_DWORD

   Data: 1

NOTE: The first TransportBase is 0 which always points to Snalm.dll.

STATUS

Microsoft has confirmed this to be a problem in SNA Server versions 2.11, 2.11 Service Pack 1, 2.11 Service Pack 2, and 3.0. This problem was corrected in the latest Microsoft SNA Server 3.0 U.S. Service Pack. For information on obtaining the service pack, query on the following word in the Microsoft Knowledge Base (without the spaces):

   S E R V P A C K
 

	
	


Keywords : kbbug2.11.sp1 kbbug3.00 kbfix3.00.sp1 kbnetwork prodsna snaadmin snamanager snawinnt
Version : 2.11.sp1 2.11.sp2 3.0
Platform : WINDOWS
Issue type : kbbug
Resolution Type : kbfix


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: April 14, 1997
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.