XL: Macros to Set Row Height and Column Width

Last reviewed: February 3, 1998
Article ID: Q130050
The information in this article applies to:
  • Microsoft Excel 98 Macintosh Edition
  • Microsoft Excel 97 for Windows
  • Microsoft Excel for Windows 95, versions 7.0, 7.0a
  • Microsoft Excel for Windows, versions 5.0, 5.0c
  • Microsoft Excel for the Macintosh, versions 5.0, 5.0a
  • Microsoft Excel for Windows NT, version 5.0

SUMMARY

Microsoft Excel uses the font assigned in the Normal style as the basis for column widths. There is no direct way to assign exact column widths in inches/centimeters without trial and error.

Microsoft Excel uses the number of digits (specifically, the number of zeros) using the Normal style font as the measurement to determine column widths. (There are some fonts that have digits of different widths, but this is unusual.)

For example, using the default font, a column with width of 10 means the column width needed to display 10 non-bold, non-italic, Arial 10-point zeros. On the Macintosh, this same column width is 10 non-bold, non- italic Geneva 10-point zeros. Microsoft Excel uses digits to determine column widths so that when you change the font for a style on a worksheet, the columns grow or shrink to display this number of digits in the column.

Note that this method of determining column widths is not "exact" when you use other characters, such as spaces, dollar-signs, parentheses, and so on.

This article provides sample Microsoft Visual Basic for Applications macros (Sub procedures) that allow you to set row height and column width in either inches or centimeters.

MORE INFORMATION

Microsoft provides programming examples for illustration only, without warranty either expressed or implied, including, but not limited to, the implied warranties of merchantability and/or fitness for a particular purpose. This article assumes that you are familiar with the programming language being demonstrated and the tools used to create and debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure, but they will not modify these examples to provide added functionality or construct procedures to meet your specific needs. If you have limited programming experience, you may want to contact the Microsoft fee-based consulting line at (800) 936-5200. For more information about the support options available from Microsoft, please see the following page on the World Wide Web:

   http://www.microsoft.com/support/supportnet/refguide/default.asp

The following Visual Basic for Applications procedures will allow the row and column widths to be specified in Inches.

   Sub RowHeightInInches()
       Dim inches as Integer
       ' Get the desired column width.
       inches = Application.InputBox("Enter Row Height in Inches", _
           "Row Height (Inches)", Type:=1)
       ' If the cancel button was not pressed.
       If inches Then
           ' Convert and set the column height.
           Selection.RowHeight = Application.InchesToPoints(inches)
       End If
   End Sub

   Sub ColumnWidthInInches()

       Dim inches As Integer, points As Integer, savewidth As Integer
       Dim lowerwidth As Integer, upwidth As Integer, curwidth As Integer
       Dim Count As Integer

       ' Turn screen updating off.
       Application.ScreenUpdating = False
       ' Ask for the desired width in inches.
       inches = Application.InputBox("Enter Column Width in Inches", _
           "Column Width (Inches)", Type:=1)
       ' If the cancel button for the input box is pressed, exit the
       ' procedure.
       If inches = False Then Exit Sub
       ' Convert the entered inches to points.
       Points = Application.InchesToPoints(inches)
       ' Save the current column width setting.
       savewidth = ActiveCell.ColumnWidth
       ' Set the column width to the maximum allowed.
       ActiveCell.ColumnWidth = 255
       ' If points wanted is greater than points for 255 characters.
       If Points > ActiveCell.Width Then
           ' Display a message box (the specified size is too large), and
           ' let user know maximum allowed value.
           MsgBox "Width of " & inches & " is too large." & Chr(10) & _
               "The maximum value is " & Format(ActiveCell.Width / 72, _
               "0.00"), vbOKOnly + vbExclamation, "Width Error"
           ' Reset the column width back to the original.
           ActiveCell.ColumnWidth = savewidth
           ' Exit out of the Sub from here.
           Exit Sub
       End If

       ' Set the lowerwidth and upperwidth variables.
       lowerwidth = 0
       upwidth = 255
       ' Set the column width to the middle of the allowed character range.
       ActiveCell.ColumnWidth = 127.5
       curwidth = ActiveCell.ColumnWidth

       ' Set the count to 0 so if it can't find an exact match it won't go
       ' indefinitely.
       Count = 0
       ' Loop as long as the cell width is different from width desired
       ' and the count (iterations) of the loop is less than 20.
       While (ActiveCell.Width <> Points) And (Count < 20)
           ' If active cell width is less than desired cell width.
           If ActiveCell.Width < Points Then
               ' Reset lower width to current width.
               lowerwidth = curwidth
               ' Set current column width to the midpoint of curwidth and
               ' upwidth.
               Selection.ColumnWidth = (curwidth + upwidth) / 2
               ' If active cell width is greater than desired width.
           Else
              ' Set upwidth to the curwidth.
              upwidth = curwidth
              ' Set column width to the mid point of curwidth and lower
              ' width.
              Selection.ColumnWidth = (curwidth + lowerwidth) / 2
           End If
           ' Set curwidth to the width of the column now.
           curwidth = ActiveCell.ColumnWidth
           ' Increment the count counter.
           Count = Count + 1
       Wend
   End Sub

The following Visual Basic for Applications procedures will allow the row and column widths to be specified in centimeters.

   Sub RowHeightInCentimeters()
       Dim cm As Integer
       ' Get the row height in centimeters.
       cm = Application.InputBox("Enter Row Height in Centimeters", _
           "Row Height (cm)", Type:=1)
       ' If cancel button not pressed and a value entered.
       If cm Then
           ' Convert and set the row height
           Selection.RowHeight = Application.CentimetersToPoints(cm)
       End If
   End Sub

   Sub ColumnWidthInCentimeters()

       Dim cm As Integer, points As Integer, savewidth As Integer
       Dim lowerwidth As Integer, upwidth As Integer, curwidth As Integer
       Dim Count As Integer

       ' Turn screen updating off.
       Application.ScreenUpdating = False
       ' Ask for the width in inches wanted.
       cm = Application.InputBox("Enter Column Width in Centimeters", _
           "Column Width (cm)", Type:=1)
       ' If cancel button for the input box was pressed, exit procedure.
       If cm = False Then Exit Sub
       ' Convert the inches entered to points.
       Points = Application.CentimetersToPoints(cm)
       ' Save the current column width setting.
       savewidth = ActiveCell.ColumnWidth
       ' Set the column width to the maximum allowed.
       ActiveCell.ColumnWidth = 255
       ' If the points desired is greater than the points for 255
       ' characters...
       If Points > ActiveCell.Width Then
           ' Display a message box because the size specified is too
           ' large and give the maximum allowed value.
           MsgBox "Width of " & cm & " is too large." & Chr(10) & _
               "The maximum value is " & _
               Format(ActiveCell.Width / 28.3464566929134, _
               "0.00"), vbOKOnly + vbExclamation, "Width Error"
           ' Reset the column width back to the original.
           ActiveCell.ColumnWidth = savewidth
           ' Exit the Sub.
           Exit Sub
       End If
       ' Set the lowerwidth and upper width variables.
       lowerwidth = 0
       upwidth = 255
       ' Set the column width to the middle of the allowed character
       ' range.
       ActiveCell.ColumnWidth = 127.5
       curwidth = ActiveCell.ColumnWidth
       ' Set the count to 0 so if it can't find an exact match it won't
       ' go on indefinitely.
       Count = 0
       ' Loop as long as the cell width in is different from width
       ' wanted and the count (iterations) of the loop is less than 20.
       While (ActiveCell.Width <> Points) And (Count < 20)
           ' If active cell width is less than desired cell width.
           If ActiveCell.Width < Points Then
               ' Reset lower width to current width.
               lowerwidth = curwidth
               ' set current column width to the midpoint of curwidth
               ' and upwidth.
               Selection.ColumnWidth = (curwidth + upwidth) / 2
           ' If active cell width is greater than desired cell width.
           Else
               ' Set upwidth to the curwidth.
               upwidth = curwidth
               ' Set column width to the mid point of curwidth and lower
               ' width.
               Selection.ColumnWidth = (curwidth + lowerwidth) / 2
           End If
           ' Set curwidth to the width of the column now.
           curwidth = ActiveCell.ColumnWidth
           ' Increment the count counter.
           Count = Count + 1
       Wend
   End Sub


Additional query words: XL98 XL97 XL7 XL5 howto
Keywords : kbcode kbprg kbualink97 PgmHowto
Version : WINDOWS:5.0,5.0c,7.0,7.0a,97; MACINTOSH:5.0,5.0a,98
Platform : MACINTOSH WINDOWS
Issue type : kbhowto


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: February 3, 1998
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.