PRB: Error 6 RPC_S_PROTSEQ_NOT_SUPPORTED in 16-bit Application

Last reviewed: July 23, 1997
Article ID: Q124877
3.10 WINDOWS kbnetwork kbprg

The information in this article applies to:

  • Microsoft Windows Software Development Kit (SDK) for Windows version 3.1

SYMPTOMS

When trying to run a 16-bit RPC application, the RpcBindingFromStringBinding() may return error number 6. In the RPCERR.H file, this is defined as:

   RPC_S_PROTSEQ_NOT_SUPPORTED

CAUSE

Unlike Windows NT, the 16-bit environments do not automatically install the RPC runtime files and drivers. If the driver for the protocol sequence your are using is not installed, or is not in your path, RpcBindingFromStringBinding() will fail with error code 6.

RESOLUTION

The 16-bit RPC runtimes and drivers ship with the Win32 SDK. You can install them from the CD by going to the \mstools\rpc_dos\disk1 directory on the CD and running setup. By default, the installation should install all drivers. If you want to verify that, choose the custom install option.

After the drivers are installed, you will need to make sure that they are in your path before attempting to run a 16-bit RPC application.

NOTE: You must install the 16-bit drivers even if you are running your 16-bit application on a Windows NT host.

MORE INFORMATION

Windows drivers have the extension .DLL and DOS drivers have the extension .RPC. The driver names and the protocol sequence they support are as follows:

   rpc16c1    - Named Pipes
   rpc16c3    - TCP/IP
   rpc16dg3   - UDP/IP
   rpc16c4    - DEC Net
   rpc16c5    - NetBIOS
   rpc16c6    - SPX
   rpc16dg6   - IPX

REFERENCES

The "Installing RPC" section of the RPC Programmer's Reference.


Additional reference words: 3.10
KBCategory: kbnetwork kbprg
KBSubcategory: NtwkRpc
Keywords : kb16bitonly


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: July 23, 1997
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.