Error Message When Installing Roland MIDI Devices

 Last reviewed: November 22, 1994
Article ID: Q82417
The information in this article applies to:
  • Microsoft Windows operating system versions 3.1, 3.11

SYMPTOMS

When you install either the Roland LAPC1 or Roland MPU-401 driver from the Microsoft Windows Control Panel, the following message is generated: 

   Roland MPU-401

   A configuration problem has occurred.
   Use the drivers option in the Control Panel
   to reconfigure the MPU-401 driver.

CAUSE

This error message occurs because the current settings for the Roland device are incorrect (you haven't had a chance to set them yet).

This message only appears when either the PORT or IRQ for the Roland device is incorrect. After correctly setting them, you will no longer see the message.

RESOLUTION

Ignore this message during first installation and choose the OK button to correctly set the PORT and IRQ settings for the device.

MORE INFORMATION

There are separate entries for the Roland MPU-401 and the Roland LAPC1 in the dialog box that appears when you select the Drivers icon from the Control Panel, but they actually use the same Windows device driver.

The Roland LAPC1 is comprised of a Roland MPU-401 and a Roland MT-32. Access to the LAPC1 is provided using the MPU-401. When installing the Windows driver for the LAPC1, the error message is the same as for the MPU-401 because this message comes from the Windows device driver MPU401.DRV.

The Roland MPU-401 is a port; it provides similar services as a serial port.

KBCategory: kbmm kb3rdparty
KBSubcategory: win31 windrvr
Additional reference words: 3.10 Roland LAPC1 MPU-401 MPU401 sonic 3.11
control panel setup

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: November 22, 1994
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.