Use Adlib MIDI Map with Sound Blaster Internal Synthesizer

 Last reviewed: November 22, 1994
Article ID: Q85179
The information in this article applies to:
  • Microsoft Windows operating system versions 3.1, 3.11

SYMPTOMS

When you play a MIDI (.MID) file on a Creative Labs Sound Blaster (DSP revision 1.0 and 1.5) internal synthesizer, no output is heard.

The following Windows error message may be displayed: 

   The current MIDI setup references a MIDI device which is not
   installed on your system. Do you want to continue?

      [Yes] [No]
In other cases, the file seems to play but you can't hear the sound. There is no error message.

CAUSE

The MIDI Mapper is configured incorrectly.

If the error message occurs, then the MIDI Mapper is configured to use a hardware device that is not installed in the PC.

If the error message isn't displayed but no sound is produced, the MIDI Mapper is configured with the Port Name as "Creative Labs Sound Blaster 1.0" or the "Creative Labs Sound Blaster 1.5" and is attempting to send the MIDI data to an external synthesizer connected to the sound board using an add-on MIDI interface. Unless an external synthesizer is connected, no sound is played.

RESOLUTION

You must select "Adlib" or "Adlib general" in the MIDI Mapper.

  1. From the Control Panel, run MIDI Mapper
.

  1. Set the Name to Adlib or Adlib General.

  2. Save your changes and restart Windows.

MORE INFORMATION

Windows version 3.1 supplies multimedia drivers for the Creative Labs Sound Blaster 1.0 and 1.5. The Adlib driver is installed with these cards to access the built-in Synthesizer chip.

To properly address the internal synthesizer chip on the Sound Blaster, the MIDI Mapper should be set to "Adlib" or "Adlib general."

For more information, contact Creative Labs technical support.

The Sound Blaster product here is manufactured by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.

KBCategory: kbmm kbsound kb3rdparty kberrmsg
KBSubcategory: win31
Additional reference words: 3.10 3.11 MWIN Media Player

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: November 22, 1994
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.