Hauppauge Win/TV and Windows

Last reviewed: November 22, 1994
Article ID: Q89615
The information in this article applies to:
  • Microsoft Windows operating system versions 3.0, 3.0a, 3.1, 3.11

SYMPTOMS

When you use the Hauppauge Win/TV video system with Windows, you may notice the following limitations:

  • The color magenta (purple with red) does not display correctly. This is a limitation of the Hauppauge video, and may apply to other television video boards also.
  • You may experience problems loading and saving still-frame pictures.
  • You may experience difficulty using WinTV with Microsoft Video for Windows.

In addition, the 16,000,000 color mode that some video adapters support will not work with WinTV.

MORE INFORMATION

Win/TV is a combination hardware/software system that allows Windows users to view full-motion video and television in a resizable window. Win/TV also allows Windows users to capture screens and save them in a variety of graphic file formats (for example, BMP, GIF, PCX, MMP).

In order to use Microsoft Video for Windows, the WinTV card and software must be revision 'D' or later. To upgrade the card, you must return it to the factory so that the IRQ can be reset to IRQ 15.

Magenta Displays Incorrectly

The magenta display problem occurs because the Win/TV system uses a technique called "color keying" to mix the computer's standard video signal with a television signal generated by the Win/TV hardware.

The color keying process does not actually send the television signal through Windows. Rather, the Win/TV software fills its on-screen window (the display area) with a solid block of magenta and sends the location of the display area to the Win/TV hardware.

When the video signal is sent out from the computer's video adapter, the Win/TV hardware superimposes its television signal over any occurrence of magenta that lies within the bounds of the display area. Under normal circumstances, this allows other windows to be displayed on top of the Win/TV window.

Problems Loading/Saving Still-Frame Pictures

If a computer has 16 megabytes (MB) of RAM installed, the user should upgrade to WinTV version 2.03 or later. This solves the problem of loading and saving still-frame pictures. The current versions of WinTV can save and load still-frame pictures while Windows is in 386 enhanced mode only. This is by design.

Using WinTV with Microsoft Video for Windows

To use Microsoft Video for Windows, the WinTV card and software must be revision 'D' or later. To upgrade the card, you must return it to the factory so that the IRQ can be reset to IRQ 15.

The Hauppauge Win/TV product included here is manufactured by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.

Win/TV Installation and Reference Manual, pages 1-1 through 1-2


KBCategory: kbhw kbdisplay kb3rdparty kbprb
KBSubcategory: win30 win31
Additional reference words: 3.00 3.00a 3.10 3.11 video display color
hauppauge tv vga win31 television 3rdparty


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: November 22, 1994
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.