Network Installation of TrueType Font Pack 2

Last reviewed: November 21, 1994
Article ID: Q96908
This information in this article applies to:
  • Microsoft TrueType Font Pack 2 for Windows
  • Microsoft Windows operating system, versions 3.1, 3.11

SUMMARY

This article discusses installing Microsoft TrueType Font Pack 2 on a network.

MORE INFORMATION

There are two options for network installations of the TrueType Font Pack 2: you can allow all workstations to both access the new TrueType fonts and install the Font Assistant, or you can only allow users to access the new TrueType fonts.

To allow all workstations to access the TrueType fonts and install the Font Assistant, use the following steps:

  1. Copy the contents of each disk to subdirectories of the Windows shared directory called DISK1, DISK2, and DISK3, and so forth (the number of disks varies depending on which disk size you have).

  2. Run SETUP.EXE from the DISK1 subdirectory.

  3. Follow the online instructions.

  4. Other users should follow this same procedure for their workstations.

NOTE: Make sure you are using a network license pack if multiple users will have access to the TrueType Font Pack 2. For pricing and availability information, call the Microsoft Sales Information Center (MSIC) at (800) 426- 9400.

To allow users to access only the TrueType fonts, use the following steps:

  1. Use the EXPAND.EXE file in Windows 3.1 to decompress all the .TT_ files to a directory called TTFONTS, then type the following

          expand a:\*.tt_ <x>:\ttfonts
    

    where <x> is the drive containing the ttfonts directory.

  2. Change to the TTFONTS directory and rename all the *.TT_ files to *.TTF with the following command:

          rename *.tt_ *.ttf
    

  3. Start Windows on the workstation.

  4. In Control Panel, choose the Fonts icon.

  5. Choose the Add button and select the TTFONTS directory.

  6. Clear the Copy To Windows Directory check box if you don't want the fonts loaded on the hard disk drive.

  7. Choose the Select All button, then choose the OK button.

  8. Repeat steps 1-7 for other workstations that are licensed to use these fonts.

If you receive any of the following error messages, you do not have full rights to the directory that contains the fonts:

   Cannot Change properties of the file named <filename>.

   Setup program file has been modified or corrupted.

The following warning message normally occurs when you are using TrueType fonts from a network drive:

   The specified path points to a font file that may not be available
   during later Windows sessions.

If you want to control access to the fonts, change the network rights necessary to access the TTFONTS directory. Consult your network manual for this procedure.

You can also substitute your user directory or local hard disk drive instead of the TTFONTS directory on the server.


KBCategory: kbprint kbnetwork
KBSubcategory:
Additional reference words: 3.10 3.11 true type tt ttf fontpack2


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: November 21, 1994
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.