WFWG: 3C509 Modem Setting May Disable Network Functionality

Last reviewed: April 25, 1996
Article ID: Q96948
The information in this article applies to:
  • Microsoft Windows for Workgroups versions 3.1, 3.11

SYMPTOMS

The 3Com 3C509 network interface card (NIC) has a diagnostic setting to adjust its use of processor time if a modem is present on the computer. If a higher modem speed is set (such as 38.4 kilobits per second [Kbps] to 14.4 Kbps) instead of the default value of 9600 bits per second (BPS), the following problems may occur:

  • Loss or lack of network functionality, for example:

        -- Inability to send packets over the network
        -- Inability to maintain network connections
        -- Inability to be "seen" on the network
    
  • Dropped characters and/or excessive retries with modem connections.
  • One of the following error messages may appear after the NET START command is executed:

          Error #5: Access Denied
    

    -or-

          Error 5740: The Protocol Manager has reported that a protocol
          has failed initialization
    

WORKAROUNDS

If any of the above problems occur, use 3Com's diagnostic utility to change the modem speed setting. Slower computers should lower the modem speed settings to 2400, 1200, or No Modem to improve performance.

If either of the error message persists, reset the adapter to 9600 BPS support (the default), then soft-boot the computer. If the message still occurs, set the 3C509 card to No Modem.

NOTE: On faster computers, there should only be a slight difference between settings.

MORE INFORMATION

3Com's Etherlink III (3C509) card takes advantage of a new standard in network adapter architecture known as Parallel Tasking. The adapter uses Application Specific Integrated Circuits (ASIC) and other advanced components to allow a higher level of integration so that an adapter can handle multiple tasks per frame. Using this technology, the 3C509 adapter can use "predictive interrupts" to issue an interrupt to the CPU when something important is about to happen and continue to process user data until the CPU actually responds. Accordingly, the 3C509 card can allocate some of its resources to affect the maximum modem speed setting, which is on the card. This setting allows for faster access of a modem on a machine using a network.

The modem speed setting tells the adapter how long it can disable interrupts without causing problems with the serial port. The lower the modem speed, the longer the adapter can keep interrupts disabled. Performance issues concerning modem settings are more drastic on slower computers. The default value setting of 9600 BPS works whether you have a modem or not, or if the modem is slower than the default. The modem value should not be changed unless performance problems result.

Other setting options that may be modified with the 3C509 adapter diagnostic utility include the following: I/O Base Address, IRQ, Boot PROM, Transceiver Type, and Network Driver Optimization. Additionally, the program contains the option to test the card and display diagnostic and troubleshooting information files.

If the maximum modem speed of 38.400 is used, 3Com provides a patch that replaces the ELNK3.DOS driver in the CONFIG.SYS file. With the maximum modem setting enabled, this patch will protect against the PRO0032E error message that may display when the NDIS protocols attempt to bind at startup (bootup).

The diagnostic utility (3C509N.ZIP) and the patch file (MAX509.EXE) may be downloaded from 3Com's bulletin board service by calling (408) 980-8204 or from CompuServe by typing "go Threecom" (without the quotation marks).

For additional information on 3Com's 3C509 card and its diagnostic utility program, contact 3Com technical support at (800) 876-3266.

The 3C509 network interface card is manufactured by 3Com, a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.


KBCategory: kbnetwork kbdisplay kb3rdparty kbhw
KBSubcategory: wfw wfwg wincomm
Additional reference words: 3.1 3.10 3.11 slow


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: April 25, 1996
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.