Tandy DAC or PSSJ Windows Sound Driver

Last reviewed: November 22, 1994
Article ID: Q98318
The information in this article applies to:
  • Microsoft Windows operating system versions 3.1, 3.11

SUMMARY

Tandy Corporation has a Microsoft Windows 3.1 compatible sound driver designed to take advantage of the Digital Audio Circuitry (DAC) sound chip found in several Tandy computers.

MORE INFORMATION

Tandy manufactures a line of computers that use a DAC chip for playing and recording sound. The DAC chip offers higher performance sound generation than the standard PC Speaker sound driver. This driver can play and create .WAV files on the following Tandy machines:

   2500XL       2500SX25
   2500XL/2     1000RSX
   2500SX       2500RSX
   2500SX20     2500SX/33

NOTE: The 2500RSX computer can play .WAV files but cannot create them because it does not have an MIC port.

Files included with the Tandy sound driver are as follows:

   TDACWAVE.DRV     9040  11-05-92  1:52P
   OEMSETUP.INF     1785  11-05-92  1:48P
   READ.ME          1302  11-05-92  1:18P

Below is the text of the READ.ME file that comes with the Tandy sound driver.

READ.ME

To install TDACWAVE.DRV as a Windows 3.1 sound driver:

  1. Run Windows 3.1.

  2. Run the Control Panel from the Main group.

  3. Choose the Drivers icon.

  4. Choose the Add button.

  5. In the List of Drivers box, select Add Unlisted or Updated Driver and then choose the OK button.

  6. Insert this disk into a drive and, if necessary, change the drive name displayed in the dialog box to the drive name containing this disk.

  7. Choose the OK button.

  8. Select Tandy DAC Wave from the list and choose the OK button.

Advanced installation notes:

TDACWAVE.DRV supports a section in the SYSTEM.INI file titled [TDACWAVE.DRV]. This section may have any or none of the following parameters

   port=
   int=
   dmachannel=

where the port is a hexadecimal value, int is the IRQ setting in decimal, and dmachannel is the DMA channel in decimal.

If port is not specified, the driver attempts to obtain this value from a BIOS call. If dmachannel is not specified, the driver defaults to DMA Channel 1. If int is not specified, the driver defaults to interrupt 7.

Note that TDACWAVE.DRV does not create the [TDACWAVE.DRV] section. If the system needs to override the driver's default values for any of the above parameters, the SYSTEM.INI file must be manually edited.

Contact your local Radio Shack store or Radio Shack Computer Support Services for technical support or to obtain the driver disk.

The Tandy Sound Driver is manufactured by Tandy Corporation, a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.


KBCategory: kbmm kbsound kb3rdparty
KBSubcategory: win31 windrvr
Additional reference words: 3.10


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: November 22, 1994
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.