Automatic Mounting in Real Mode Disabled in DriveSpace 3

Last reviewed: May 7, 1996
Article ID: Q137001
The information in this article applies to:
  • Microsoft Windows 95
  • Microsoft Plus! for Windows 95

SYMPTOMS

When you boot your computer to a command prompt, compressed, removable- media drives are not mounted. In addition, the physical boot drive is not mounted when you boot your previous operating system.

Also, when you change the Automatically Mount New Compressed Drives setting in DriveSpace, the Drvspace.ini file is not updated, although the registry is.

CAUSE

DriveSpace 3, which is included with Microsoft Plus!, does not support automatically mounting drives in real mode by default.

RESOLUTION

Mounting Compressed Volumes Manually

To work around this behavior, use ScanDisk to mount compressed volumes in real mode.

The following example demonstrates how to use ScanDisk in real mode to mount a compressed volume on drive A:

  1. At the command prompt, type the following command

          c:\windows\command\scandisk.exe a:\<compressed_volume_name>
    

    where <compressed_volume_name> is the name of the compressed volume file (CVF) on drive A. For example, if the name of the CVF on drive A were Dblspace.000, you would type the following line:

          c:\windows\command\scandisk.exe a:\dblspace.000
    

  2. ScanDisk detects that the CVF has not been mounted and offers to check the host drive. Choose not to check the host drive by clicking No.

  3. When you are prompted to mount drive A, click Yes.

  4. Quit ScanDisk. The volume on drive A is mounted for the duration of the session.

Enabling Automatic Mounting in Real Mode

To enable automatic mounting of compressed volumes on removable-media drives in real mode, follow these steps:

  1. In Windows Explorer, use the right mouse button to click the Drvspace.ini or Dblspace.ini file in the root folder of the physical boot disk, and then click Properties on the menu that appears.

  2. Click the Read-Only check box to clear it, and then click OK.

  3. Double-click the Drvspace.ini or Dblspace.ini file to open it.

  4. Change the line that reads

          AutoMount=0
    

    to read:

          AutoMount=1
    

  5. Save and then close the file.

  6. Restart your computer.

WARNING: Modifying the Dblspace.ini or Drvspace.ini file incorrectly can cause serious problems that may require you to reinstall Windows 95. Microsoft cannot guarantee that problems resulting from incorrect modifications to these files can be solved. Edit these files at your own risk.


KBCategory: kbenv
KBSubcategory: win95 dblspace drvspace winplus
Additional reference words: 95


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: May 7, 1996
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.