MS Backup Err Msg: Errors Occurred During This Operation...

 Last reviewed: May 8, 1996
Article ID: Q140790
The information in this article applies to:
  • Microsoft Windows 95

SYMPTOMS

When you use Microsoft Backup to format a QIC-80 2120XL (extended length) tape on a Connor Tape Stor 250 tape drive that is controlled by the floppy disk drive controller, you may receive the following error message: 

   Errors occurred during this operation. Do you want to view them now?
The error log reports the following information: 

   Error/Warnings during operation:
   1173(11056,2) - \\  Unknown error.
   1320(13408,3) - \\  Warning: This operation has been canceled by
                       the system.
   Total number of errors encountered: 2

CAUSE

This error can occur if you try to format a 2120XL tape on an older Connor Tape Stor 250 tape drive. Older drives can be identified by the presence of an eject button.

RESOLUTION

Connor currently has no solution for this problem. Connor advises customers to purchase preformatted XL tapes for these older drives. Connor's newer drives (without the eject button) do not experience this problem.

KBCategory: kbhw kberrmsg
KBSubcategory: win95 mwbackup
Additional reference words: 95

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: May 8, 1996
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.