SNMP Agent Does Not Respond After Returning from Suspend Mode

Last reviewed: November 15, 1996
Article ID: Q159565

The information in this article applies to:

Microsoft Windows 95 OEM Service Release versions 2, 2.1

SYMPTOMS

When you are using Advanced Power Management features and the computer returns from Suspend mode, SNMP Agent may not respond when you attempt to administer the computer with SNMP network management software.

CAUSE

SNMP Agent is not compatible with Advanced Power Management.

RESOLUTION

When the computer returns from Suspend mode, quit and restart Snmp.exe. To do so, type the following lines at a command prompt, pressing ENTER after each line:

   snmp -close
   snmp

STATUS

Microsoft is researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.

KBCategory: kbnetwork
KBSubcategory: win95 osr2
Additional reference words: 95

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: November 15, 1996
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.