Can't Print to an HP Network Printer Using DLC

Last reviewed: March 25, 1997
Article ID: Q102792

The information in this article applies to:
  • Microsoft Windows NT operating system, version 3.1
  • Microsoft Windows NT Advanced Server, version 3.1
  • Microsoft Windows NT Server version 4.0
  • Microsoft Windows NT Workstation version 4.0

SYMPTOMS

If you are connected directly to a Hewlett-Packard (HP) network printer using Data Link Control (DLC), you may not be able to print if another workstation is connected to the same printer and it is configured to use Continuous Timers.

CAUSE

If a workstation is connected to an HP network printer and is using Continuous as the Timer, it will not relinquish the printer after printing and other workstations cannot print even though they are connected.

RESOLUTION

To work around this problem, follow the procedure below for each workstation connected to the HP network printer:

  1. Start Print Manager and select the network printer.

  2. Select Printer Properties. In the Hewlett-Packard Network Peripheral Port dialog box, select Timers.

  3. Change the setting to Job Based instead of Continuous. The default is Continuous with 60 sec Time Interval.

MORE INFORMATION

The Job Based option breaks the connection between available workstations and the printer after each job. This allows several workstations on the network to use the HPMON.DLL printer driver to print directly to a network-connected peripheral.

The Continuous option does not break the connection between the server and the printer. It is possible to set up a Print Server so that workstations that want to print to the DLC printer must use the shared printer defined on the server. This allows the network administrator to maintain one workstation as a print server so that other workstations do not have to have the HPMON.DLL printer driver installed.

NOTE: On a single LAN, only one of these methods should be used. If one workstation is configured for Job Based (as is the HP Monitor utility for Windows for Workgroups), while another workstation is configured for Continuous, the workstation using the Job Based configuration will be unable to print after the workstation using Continuous has printed.


Additional query words: wfw wfwg prodnt
Keywords : kbnetwork kbprint ntnetserv ntprint NTSrvWkst
Version : 3.10 4.0
Platform : WinNT


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: March 25, 1997
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.