Token Ring Network Startup Disk, Error 53: Network not found

Last reviewed: January 31, 1995
Article ID: Q122447
The information in this article applies to:
  • Microsoft Windows NT Server version 3.5

To make a Token Ring Network Installation Startup Disk using NWLink IPX Compatible Protocol with the Network Client Administrator utility, the frame type has to be manually changed in the PROTOCOL.INI (or NET.CFG) file because the network startup disk uses Ethernet 802.2 as the default frame type. In a Token Ring environment, this may cause an error when you try to use the NET USE or NET VIEW commands:

   Error 53: Network not found

Following are the required Token Ring frame type syntaxes for workstations that need PROTOCOL.INI modifications:

Network Client version 3.0 for MS-DOS and Windows:

   FRAME=TOKENRING

Windows for Workgroups 3.11:

    FRAME=TOKEN-RING

NetWare (modify NET.CFG):

   FRAME=TOKEN-RING and TOKEN-RING_SNAP

Other frame types include the following:

   ETHERNET_802.2  (Default)
   ETHERNET_802.3
   ETHERNET_II
   ETHERNET_SNAP


Additional reference words: wfw wfwg prodnt 3.50 3.11 wfwg
KBCategory: kbnetwork kbenv
KBSubcategory: ntinterop ntconfig


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: January 31, 1995
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.