Intel TokenExpress Driver Settings

 Last reviewed: November 9, 1994
Article ID: Q122584
The information in this article applies to:
  • Microsoft Windows NT Workstation version 3.5
  • Microsoft Windows NT Server version 3.5

SYMPTOMS

When you install the driver for the Intel TokenExpress 16/4 token ring adapter, using the default values results in an error in the Event Viewer stating that the necessary resources could not be allocated. Event Viewer shows Event ID 5001, and the description states: 

   OcTk16: Could not allocate the resources necessary for operation.
There is no network connectivity because the card is not being initialized.

CAUSE

According to Intel, the default settings in the Windows NT driver do not work with this network interface card (NIC).

RESOLUTION

The settings recommended by Intel for this card are: 

   RECEIVE BUFFERS :  18
   TRANSMIT BUFFERS:  12
   FRAME SIZE :  4K
TokenExpress is manufactured by Intel Corporation, a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.

Additional reference words: prodnt 3.50
KBCategory: kbnetwork kb3rdparty
KBSubcategory: ntdriver



THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: November 9, 1994
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.